[{"id":933,"product_id":77,"question":"Why does my purifier water suddenly taste or smell odd?","answer":"Most often this is due to clogged carbon\/post\u2011carbon filters, an exhausted RO membrane, bacterial film inside the tank, or stored water sitting too long; Peomiz technicians inspect the filter pack, tank hygiene and TDS, then sanitize and replace the right cartridges to restore fresh\u2011tasting water.","created_at":"2025-12-04 20:20:46","updated_at":"2025-12-04 20:20:46","deleted_at":null},{"id":934,"product_id":77,"question":"My RO water tastes too flat or bitter\u2014can Peomiz fix the taste?","answer":"Yes; once purity is confirmed, the technician checks the mineralizer\/taste\u2011adjuster stage and TDS setting, then fine\u2011tunes or replaces those parts so you get safe water with balanced TDS and a more natural taste rather than over\u2011stripped or bitter water.","created_at":"2025-12-04 20:20:46","updated_at":"2025-12-04 20:20:46","deleted_at":null},{"id":935,"product_id":77,"question":"There is a \u201ctank smell\u201d if the purifier is unused for a few days\u2014is it safe?","answer":"Stale water left in the storage tank can pick up odour from plastic or mild biofilm; technicians usually drain, chemically sanitize and flush the tank and lines, and may recommend a more frequent auto\u2011flush or service interval if the unit is used only intermittently.","created_at":"2025-12-04 20:20:46","updated_at":"2025-12-04 20:20:46","deleted_at":null}]

[{"id":927,"product_id":74,"question":"What should I check before booking Peomiz for a new purifier installation?","answer":"You mainly need a free power socket, a nearby tap or pipeline connection with adequate pressure, a drain point for reject water, and suitable wall space or platform; Peomiz installers verify these on\u2011site and bring standard fittings, brackets and tubing required for a clean, leak\u2011free installation.","created_at":"2025-12-04 20:02:57","updated_at":"2025-12-04 20:02:57","deleted_at":null},{"id":928,"product_id":74,"question":"Can Peomiz reinstall or relocate my purifier if I am shifting home?","answer":"Yes; the technician carefully dismantles the unit, caps the open ports, transports and reinstalls it at the new location, flushing filters and checking TDS, pressure and leakage so the system runs like before after shifting.","created_at":"2025-12-04 20:02:57","updated_at":"2025-12-04 20:02:57","deleted_at":null}]

[{"id":922,"product_id":78,"question":"Why is the water flow from my RO\/UV purifier very slow?","answer":"Slow flow is usually due to choked pre\u2011filters or membrane, low input water pressure, a weak pump, or low pressure in the RO tank; Peomiz checks each stage, cleans or replaces clogged filters, tests pump and pressure, and restores normal flow without compromising purification.","created_at":"2025-12-04 17:51:12","updated_at":"2025-12-04 17:51:12","deleted_at":null},{"id":923,"product_id":78,"question":"My purifier\u2019s tank fills very slowly even though tap pressure is good\u2014what could be wrong?","answer":"In such cases the inlet valve, flow restrictor, or internal tubing may be partially blocked, or the RO membrane may be nearing end of life; the technician measures actual flow and pressure inside the unit, clears or changes the affected parts, and confirms tank fill time before closing the job.","created_at":"2025-12-04 17:51:12","updated_at":"2025-12-04 17:51:12","deleted_at":null}]

[{"id":924,"product_id":79,"question":"My purifier has no lights or sound\u2014how does Peomiz diagnose \u201cno power\u201d issues?","answer":"The technician first checks the wall socket and adapter\/SMPS, then inspects wiring, fuses and the main PCB; most \u201cdead\u201d units are revived by fixing loose connections or replacing a faulty adapter or SMPS, and only rarely require PCB replacement.","created_at":"2025-12-04 17:52:45","updated_at":"2025-12-04 17:52:45","deleted_at":null}]

[{"id":925,"product_id":80,"question":"The purifier has power but doesn\u2019t start purification or tank filling\u2014what might be the cause?","answer":"Common reasons include a faulty float switch, low inlet pressure, clogged filters, sensor errors, or a malfunctioning control PCB; Peomiz runs a step\u2011by\u2011step check of inlet, tank level sensors, valves, pump and PCB logic to identify the failed stage and replace only what is necessary.","created_at":"2025-12-04 17:54:16","updated_at":"2025-12-04 17:54:16","deleted_at":null}]

[{"id":926,"product_id":81,"question":"How do I know if my RO is still giving safe water?","answer":"TDS alone is not the full story, but as a rule RO outlet TDS should usually be in the 50\u2013150 ppm range with clear, odour\u2011free water; Peomiz technicians measure inlet and outlet TDS, examine filter age and membrane condition, and recommend parts replacement or re\u2011calibration if purity margins are not adequate.","created_at":"2025-12-04 17:55:47","updated_at":"2025-12-04 17:55:47","deleted_at":null}]

[{"id":929,"product_id":75,"question":"How often should I service my RO\/UV purifier through Peomiz?","answer":"Most brands recommend filter changes every 6\u201312 months and membrane replacement every 2\u20133 years depending on usage and raw water quality; Peomiz uses these guidelines plus your actual usage and TDS levels to set a practical service schedule so you don\u2019t over\u2011 or under\u2011service the unit.","created_at":"2025-12-04 20:09:36","updated_at":"2025-12-04 20:09:36","deleted_at":null},{"id":930,"product_id":75,"question":"What is typically covered in a standard Peomiz purifier service visit?","answer":"A standard visit usually includes basic inspection, inlet pressure and TDS checks, cleaning and sanitisation of the external unit and tank, replacement of due filters as per plan, leak testing, and a brief demo so you know how to operate and maintain the system between services.","created_at":"2025-12-04 20:09:36","updated_at":"2025-12-04 20:09:36","deleted_at":null}]

[{"id":931,"product_id":76,"question":"My purifier is leaking water\u2014what are the usual sources of leaks?","answer":"Leaks often come from loose or cracked pipe joints, worn O\u2011rings in housings, damaged taps or storage tanks, or high pressure stressing old fittings; Peomiz technicians trace the exact leak point, reseal or replace the faulty part, and also check for abnormal pressure that could cause repeat leaks.","created_at":"2025-12-04 20:16:05","updated_at":"2025-12-04 20:16:05","deleted_at":null},{"id":932,"product_id":76,"question":"Is it safe to keep using the purifier if there is a minor drip?","answer":"Even a small drip can worsen into major leakage and lead to electrical risk, wall damage or fungal growth, so Peomiz advises shutting off the inlet valve and power, using alternate drinking water, and booking a leak\u2011repair visit so joints, housings and tubing can be properly secured and tested under pressure.","created_at":"2025-12-04 20:16:05","updated_at":"2025-12-04 20:16:05","deleted_at":null}]

[{"id":139,"product_id":74,"title":"dfdfdf","subtitle":"dffdfd","created_at":"2025-12-04 20:02:57","updated_at":"2025-12-04 20:02:57","deleted_at":null}]

[{"id":162,"product_id":74,"topic":"dffdf","subtopic":"dfdfd","created_at":"2025-12-04 20:02:57","updated_at":"2025-12-04 20:02:57","deleted_at":null}]